Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

This is a Source Sought only, see characteristics of a Drive-Through Commercial Vehicle Scanner:

• High throughput drive through screening systems. Base line throughput of 120 trucks/hr. capability or greater.


• Size requirement for lager tractor trailer size vehicles, buses, and cargo containers. Predominantly scanning tractor trailer style vehicles.


• Must offer multiple views in a single scan including left, right, and top-down transmission imaging in a single scan.


• System should include a drive over inspection camera for under vehicle inspection. Include heating and drainage for cold weather operations at camera location. Include lighting for use during night inspections.


• Scanner footprint must fit in a nominal 25’X25’ area.


• Must have the ability to operate in year-round climates indicative to Cheyenne, WY. Equipment will be operated outside in the elements without an over structure or climate control.


• Utilize backscatter technology, forward scatter technology, and top-down transmission imaging technology using low energy sources that require no additional shielding. Imaging performance for backscatter shall be a minimum of 6 mm steel penetration with 5mm wire resolution. Top-down steel penetration 38 mm with 2mm wire resolution.


• One portal scan radiation exposure rate shall be
  
• Allow for comprehensive imaging of vehicles with minimal cut-off.


• Provide all image analysis software, monitor screens, workstations, computers, keyboard, mouse etc. System should have to ability to add additional workstations.


• System must have ability to hold/release the scan target vehicle, (i.e., controls for exit gate, drop arm, and stop light system).


• Store images and image date. Minimum storage of 30 days of scans.


• Include license plate reader with a 95% or greater accuracy rating.


• Include all traffic control devices necessary for operations of the system. Lights, traffic lights, radar, drop arm etc.


• Protection bollards or anti-collision system


• Include dual-energy image analysis tools. Include any upgraded image analysis tools.


• Include any upgraded intelligent image analytics tools.


• Include all applicable vehicle guides, speed displays and transmission detectors.


• Include trucking manifest scanner with the system.


• Include all system engineering including foundation, anchorage, electrical, traffic control and any other requirements.